English
Español
Русский
العربية
 |
||
| Model | UB50-18GM45-E4E5-V15 | UB30-18GM45-E4E5-V15 |
| Detecting Distance | 3-50mm | 25-30 |
| Blind Zone | 一 | 一 |
| Resolution ratio | 0.1mm | 0.1mm |
| Repeated accuracy | ±0.15% Full range value ±0.15% | |
| Accuracy | ±1%(Built-intemperoture drift compensation) | |
| Response time | 10ms | 10ms |
| Switching frequency | 100Hz | 100Hz |
| Switching delay | 2mm | 2mm |
| Power On Delay | <500ms | |
| Working voltage | 10-30V DC | |
| LED Red light | Normal open when no obiect | |
| LED Green Light | Normal open when detecting obipect | |
| Overload protection | 200mA, Red and green lights flash al the same time | |
| No-load current | ≤ 30mA | |
| Voltoge drop | ≤ 2V | |
| Input type | No learn function | |
| Material | Copper sleeve nickel plated, plastic fittings, glass filled epoxy resin | |
| Insulation | IP67 | |
| Connect type | M12 Conneclor, 5 pin | |
| Ambient temperature | -20°C~ 70°C | |
| Storage temperature | -40°C~ 85°C | |
| Weight | 32g | |
| Ultrasonic Sensor | |
| UB150-18GM45... | UB150-18GM45A... |
 |
|
| Electrical parameter | |
| Model | Output type |
| UB150-18GM45-E4E5-V15 | Digital output NPN PNP |
| UB150-18GM45A-E4E5-V15 | |
| UB150-GM45-E6E7-V15 | Double digital push-pull output |
| UB150-GM45A-E6E7-V15 | |
| UB150-GM45-AE4-V15 | 1x Analog voltage and current automatic identification output 1x npn switch output |
| UB150-GM45A-AE4-V15 | |
| UB150-GM45-IU-V15 | 0-10V Analog voltage output Single 4-20mA Analog current output |
| UB150-GM45A-IU-V15 | |
| UB150-GM45-R2-V15 | RS232 |
| UB150-GM45A-R2-V15 | |
| UB150-GM45-R4-V15 | RS485 |
| UB150-GM45A-R4-V15 | |
| UB150-GM45-IO-V15 | IO-LINK |
| UB150-GM45-IO-V15 | |
| Detection distance | 20-150mm |
| Blind zone | 0-20mm |
| Resolution ratio | 0.1mm |
| Repeated accuracy | Full range value ±0.15% |
| Accuracy | ±1% (Built-in temperature drift compensation) |
| Response time | 20ms |
| Switching delay | 2mm |
| Switching frequency | 50Hz |
| Power on delay | <500ms |
| Working voltage | 10-30V DC, UB ≥ 12V |
| LEDRed light | Normal open when on object, learning mode flashing when no object |
| LED Green light | Normal open when detecting object, learning model flashing when there is object |
| Overload protection | 200mA, Red and green lights both flashing |
| Load impedace | 1/0 ~ 300Ohm, U/>1k Ohm |
| No-load current | 30mA |
| Voltage drop | ≤2V |
| Input type | With synchronization function and learning function |
| Material | Copper sleeve nickel plated, plastic fittings, glass filles epoxy resin |
| Insulation | IP67 |
| Connection type | M12 connector 5 pin |
| Ambient temperature | -20°C~ 70°C (248-343K) |
| Storage temperature | -40°C~ 85°C (233-358K) |
| Weight | 32g/A35g |
| UB300 Ultrasonic Sensor | |
| UB300-18GM45... | UB300-18GM45A... |
 |
|
| Electrical parameter | |
| Model | Output type |
| UB300-18GM45-E4E5-V15 | Digital output NPN PNP |
| UB300-18GM45A-E4E5-V15 | |
| UB300-GM45-E6E7-V15 | Double digital push-pull output |
| UB300-GM45A-E6E7-V15 | |
| UB300-GM45-AE4-V15 | 1x Analog voltage and current automatic identification output 1x npn switch output |
| UB300-GM45A-AE4-V15 | |
| UB300-GM45-IU-V15 | 0-10V Analog voltage output Single 4-20mA Analog current output |
| UB300-GM45A-IU-V15 | |
| UB300-GM45-R2-V15 | RS232 |
| UB300-GM45A-R2-V15 | |
| UB300-GM45-R4-V15 | RS485 |
| UB300-GM45A-R4-V15 | |
| UB300-GM45-IO-V15 | IO-LINK |
| UB300-GM45-IO-V15 | |
| Detection distance | 30-300mm |
| Blind zone | 0-30mm |
| Resolution ratio | 0.1mm |
| Repeated accuracy | Full range value ±0.15% |
| Accuracy | ±1% (Built-in temperature drift compensation) |
| Response time | 20ms |
| Switching delay | 2mm |
| Switching frequency | 50Hz |
| Power on delay | <500ms |
| Working voltage | 10-30V DC, UB ≥ 12V |
| LED Red light | Normal open when on object, learning mode flashing when no object |
| LED Green light | Normal open when detecting object, learning model flashing when there is object |
| Overload protection | 200mA, Red and green lights both flashing |
| Load impedace | 1/0 ~ 300Ohm, U/>1k Ohm |
| No-load current | ≤30mA |
| Voltage drop | ≤2V |
| Input type | With synchronization function and learning function |
| Material | Copper sleeve nickel plated, plastic fittings, glass filles epoxy resin |
| Insulation | IP67 |
| Connection type | M12 connector 5 pin |
| Ambient temperature | -20°C~ 70°C |
| Storage temperature | -40°C~ 85°C |
| Weight | 32g/A35g |
| UB500 Ultrasonic Sensor | |
| UB500-18GM45... | UB500-18GM45A... |
 |
|
| Electrical parameter | |
| Model | Output type |
| UB500-18GM45-E4E5-V15 | Digital output NPN PNP |
| UB500-18GM45A-E4E5-V15 | |
| UB500-GM45-E6E7-V15 | Double digital push-pull output |
| UB500-GM45A-E6E7-V15 | |
| UB500-GM45-IU-V15 | 1x Analog voltage 0-10V Output 1 x Analog Current 4-20mA Output |
| UB500-GM45A-IU-V15 | |
| UB500-GM45-R2-V15 | RS232 |
| UB500-GM45A-R2-V15 | |
| UB500-GM45-R4-V15 | RS485 |
| UB500-GM45A-R4-V15 | |
| UB500-GM45-IO-V15 | IO-LINK |
| UB500-GM45-IO-V15 | |
| UB500-GM45-AE4-V15 | 1x Analog voltage and current automatic identification output 1x npn switch output |
| UB500-GM45A-AE4-V15 | |
| Detection distance | 50-500mm |
| Blind zone | 0-50mm |
| Resolution ratio | 0.1mm |
| Repeated accuracy | Full range value ±0.15% |
| Accuracy | ±1% (Built-in temperature drift compensation) |
| Response time | 30ms |
| Switching delay | 2mm |
| Switching frequency | 33Hz |
| Power on delay | <500ms |
| Working voltage | 10-30V DC, UB ≥ 12V |
| LED Red light | Normal open when on object, learning mode flashing when no object |
| LED Green light | Normal open when detecting object, learning model flashing when there is object |
| Overload protection | 200mA, Red and green lights both flashing |
| Load impedace | 1/0 ~ 300Ohm, U/>1k Ohm |
| No-load current | ≤30mA |
| Voltage drop | ≤2V |
| Input type | With synchronization function and learning function |
| Material | Copper sleeve nickel plated, plastic fittings, glass filles epoxy resin |
| Insulation | IP67 |
| Connection type | M12 connector 5 pin |
| Ambient temperature | -20°C~ 70°C |
| Storage temperature | -40°C~ 85°C |
| Weight | 32g/A35g |
| UB1000 Ultrasonic Sensor | |
| UB1000-18GM45... | UB1000-18GM45A... |
 |
|
| Electrical parameter | |
| Model | Output type |
| UB1000-18GM45-E4E5-V15 | Digital output NPN PNP |
| UB1000-18GM45A-E4E5-V15 | |
| UB1000-GM45-E6E7-V15 | Double digital push-pull output |
| UB1000-GM45A-E6E7-V15 | |
| UB1000-GM45-AE4-V15 | 1x Analog voltage and current automatic identification output 1x npn switch output |
| UB1000-GM45A-AE4-V15 | |
| UB1000-GM45-IU-V15 | 0-10V Analog voltage output Single 4-20mA Analog current output |
| UB1000-GM45A-IU-V15 | |
| UB1000-GM45-R2-V15 | RS232 |
| UB1000-GM45A-R2-V15 | |
| UB1000-GM45-R4-V15 | RS485 |
| UB1000-GM45A-R4-V15 | |
| UB1000-GM45-IO-V15 | IO-LINK |
| UB1000-GM45-IO-V15 | |
| Detection distance | 60-1000mm |
| Blind zone | 0-60mm |
| Resolution ratio | 0.17mm |
| Repeated accuracy | Full range value ±0.15% |
| Accuracy | ±1% (Built-in temperature drift compensation) |
| Response time | 50ms |
| Switching delay | ±2mm |
| Switching frequency | 20Hz |
| Power on delay | <500ms |
| Working voltage | 10-30V DC, UB ≥ 12V |
| LED Red light | Normal open when on object, learning mode flashing when no object |
| LED Green light | Normal open when detecting object, learning model flashing when there is object |
| Overload protection | 200mA, Red and green lights both flashing |
| Load impedace | 1/0 ~ 300Ohm, U/>1k Ohm |
| No-load current | ≤30mA |
| Voltage drop | ≤2V |
| Input type | With synchronization function and learning function |
| Material | Copper sleeve nickel plated, plastic fittings, glass filles epoxy resin |
| Insulation | IP67 |
| Connection type | M12 connector 5 pin |
| Ambient temperature | -20°C~ 70°C |
| Storage temperature | -40°C~ 85°C |
| Weight | 38g/A41g |
| UB1500 Ultrasonic Sensor | |
 |
|
| Electrical parameter | |
| Model | Output type |
| UB1500-30GM60-E4E5-V15 | Digital output NPN PNP |
| UB1500-30GM60-E6E7-V15 | Double digital push-pull output |
| UB1500-30GM60-AE-V15 | 1x Analog voltage and current automatic identification output 1x switch value push-pull output |
| UB1500-30GM60-R2-V15 | RS232 |
| UB1500-30GM60-IU-V15 | 1x analog voltage 0-10V output 1x analog current 4-20mA output |
| UB1500-30GM60-R4-V15 | RS485 |
| UB1500-30GM60-IO-V15 | IO-LINK |
| Detection distance | 80-1500mm |
| Blind zone | 0-80mm |
| Resolution ratio | 0.17mm |
| Repeated accuracy | Full range value ±0.15% |
| Accuracy | ±1% (Built-in temperature drift compensation) |
| Response time | 80ms |
| Switching delay | ±2mm |
| Switching frequency | 12.5Hz |
| Power on delay | <500ms |
| Working voltage | 10-30V DC, UB ≥ 12V |
| LED Red light | Normal open when on object, learning mode flashing when no object |
| LED Green light | Normal open when detecting object, learning model flashing when there is object |
| Overload protection | 200mA, Red and green lights both flashing |
| Load impedace | 1/0 ~ 300Ohm, U/>1k Ohm |
| No-load current | ≤30mA |
| Voltage drop | ≤2V |
| Input type | With synchronization function and learning function |
| Material | Copper sleeve nickel plated, plastic fittings, glass filles epoxy resin |
| Insulation | IP67 |
| Connection type | M12 connector 5 pin |
| Ambient temperature | -20°C~ 70°C |
| Storage temperature | -40°C~ 85°C |
| Weight | 100g |
| UB2000 Ultrasonic Sensor | |
 |
|
| Electrical parameter | |
| Model | Output type |
| UB2000-30GM60-E4E5-V15 | Digital output NPN PNP |
| UB2000-30GM60-E6E7-V15 | Double digital push-pull output |
| UB2000-30GM60-AE-V15 | 1x Analog voltage and current automatic identification output 1x switch value push-pull output |
| UB2000-30GM60-R2-V15 | RS232 |
| UB2000-30GM60-IU-V15 | 1x analog voltage 0-10V output 1x analog current 4-20mA output |
| UB2000-30GM60-R4-V15 | RS485 |
| UB2000-30GM60-IO-V15 | IO-LINK |
| Detection distance | 100-2000mm |
| Blind zone | 0-100mm |
| Resolution ratio | 0.17-0.5mm |
| Repeated accuracy | Full range value ±0.15% |
| Accuracy | ±1% (Built-in temperature drift compensation) |
| Response time | 100ms |
| Switching delay | ±2mm |
| Switching frequency | 10Hz |
| Power on delay | <500ms |
| Working voltage | 10-30V DC, UB ≥ 12V |
| LED Red light | Normal open when on object, learning mode flashing when no object |
| LED Green light | Normal open when detecting object, learning model flashing when there is object |
| Overload protection | 200mA, Red and green lights both flashing |
| Load impedace | 1/0 ~ 300Ohm, U/>1k Ohm |
| No-load current | ≤30mA |
| Voltage drop | ≤2V |
| Input type | With synchronization function and learning function |
| Material | Copper sleeve nickel plated, plastic fittings, glass filles epoxy resin |
| Insulation | IP67 |
| Connection type | M12 connector 5 pin |
| Ambient temperature | -20°C~ 70°C |
| Storage temperature | -40°C~ 85°C |
| Weight | 100g |
| UB4000 Ultrasonic Sensor | |
 |
|
| Electrical parameter | |
| Model | Output type |
| UB4000-30GM60-E4E5-V15 | Digital output NPN PNP |
| UB4000-30GM60-E6E7-V15 | Double digital push-pull output |
| UB4000-30GM60-AE-V15 | 1x Analog voltage and current automatic identification output 1x switch value push-pull output |
| UB4000-30GM60-R2-V15 | RS232 |
| UB4000-30GM60-IU-V15 | 1x analog voltage 0-10V output 1x analog current 4-20mA output |
| UB24000-30GM60-R4-V15 | RS485 |
| UB4000-30GM60-EO-V15 | Single switch push-pull output Enable |
| UB4000-30GM60-IO-V15 | IO-LINK |
| Detection distance | 200-4000mm |
| Blind zone | 0-200mm |
| Resolution ratio | 0.17-1.5mm |
| Repeated accuracy | Full range value ±0.15% |
| Accuracy | ±1% (Built-in temperature drift compensation) |
| Response time | 200ms |
| Switching delay | ±4mm |
| Switching frequency | 5Hz |
| Power on delay | <500ms |
| Working voltage | 10-30V DC, UB ≥ 12V |
| LED Red light | Normal open when on object, learning mode flashing when no object |
| LED Green light | Normal open when detecting object, learning model flashing when there is object |
| Overload protection | 200mA, Red and green lights both flashing |
| Load impedace | 1/0 ~ 300Ohm, U/>1k Ohm |
| No-load current | ≤30mA |
| Voltage drop | ≤2V |
| Input type | With synchronization function and learning function |
| Material | Copper sleeve nickel plated, plastic fittings, glass filles epoxy resin |
| Insulation | IP67 |
| Connection type | M12 connector 5 pin |
| Ambient temperature | -20°C~ 70°C |
| Storage temperature | -40°C~ 85°C |
| Weight | 130g |
| UB6000 Ultrasonic Sensor | |
 |
|
| Electrical parameter | |
| Model | Output type |
| UB6000-30GM60-E4E5-V15 | Digital output NPN PNP |
| UB6000-30GM60-E6E7-V15 | Double digital push-pull output |
| UB6000-30GM60-AE-V15 | 1x Analog voltage and current automatic identification output 1x switch value push-pull output |
| UB6000-30GM60-R2-V15 | RS232 |
| UB6000-30GM60-IU-V15 | 1x analog voltage 0-10V output 1x analog current 4-20mA output |
| UB6000-30GM60-R4-V15 | RS485 |
| UB6000-30GM60-IO-V15 | IO-LINK |
| Detection distance | 500-6000mm |
| Blind zone | 0-500mm |
| Resolution ratio | 0.17-2.5mm |
| Repeated accuracy | Full range value ±0.15% |
| Accuracy | ±1% (Built-in temperature drift compensation) |
| Response time | 300ms |
| Switching delay | ±5mm |
| Switching frequency | 3.3Hz |
| Power on delay | <500ms |
| Working voltage | 10-30V DC, UB ≥ 12V |
| LED Red light | Normal open when on object, learning mode flashing when no object |
| LED Green light | Normal open when detecting object, learning model flashing when there is object |
| Overload protection | 200mA, Red and green lights both flashing |
| Load impedace | 1/0 ~ 300Ohm, U/>1k Ohm |
| No-load current | ≤30mA |
| Voltage drop | ≤2V |
| Input type | With synchronization function and learning function |
| Material | Copper sleeve nickel plated, plastic fittings, glass filles epoxy resin |
| Insulation | IP67 |
| Connection type | M12 connector 5 pin |
| Ambient temperature | -20°C~ 70°C |
| Storage temperature | -40°C~ 85°C |
| Weight | 215g |