English
Español
Русский
العربية
| Photoelectric sensors EN33 diffuse reflection | |||||
| Technical parameters | |||||
| A photoelectric sensor that can be used in the sun | Long-distance detection, Diffused type: 150cm | ||||
| General purpose photoelectric sensor suitable for logistics device | Suitable for EN product (with NPN and PNP) in the world | ||||
| Red light / infrared light optional | |||||
 |
|||||
| Product model | Diffused type | ||||
| Model | NPN | NO | EN33-D1T50NA | EN33-D1T100NA | EN33-D1T150NA |
| NC | EN33-D1T50NB | EN33-D1T100NB | EN33-D1T150NB | ||
| PNP | NO | EN33-D1T50PA | EN33-D1T100PA | EN33-D1T150PA | |
| NC | EN33-D1T50PB | EN33-D1T100PB | EN33-D1T150PB | ||
| Power supply | 12-24VDC±10% fluctuation | ||||
| Consumption current | <30mA | <30mA | <30mA | ||
| Effective detection range | 50cm | 100cm | 150cm | ||
| Standard sensing object | Matte whiteboard paper 20cm*20cm | ||||
| Light | Infrared LED 660nm 、 Infrared 880nm | ||||
| Response time | Move and reset less than 1ms | ||||
| Ambient illumination | Lamp： Less than 3000Lus； Sunlight：Less than 11000Lus |
||||
| Ambient temperature | -25°C ~ 55°C without icing and condensation | ||||
| Ambient humidity | 30-85%RH | ||||
| Insulated resistance | >20M | ||||
| Voltage resistance | AC 1000V 50/60Hz 1 minute | ||||
| Material | Housing: reiforced ABS, Lens: polycarbon | ||||
| Product standards | GB/T14048.10-2016 | ||||
| Protection level | IP64 (IEC) | ||||
| Circuit protection | Protection against error output, power supply reserve connection, pass/cut off (100ms) |
||||
 |
|||||
| EN33 mirror reflection type | |||||
| Technical parameters | |||||
| A photoelectric sensor that can be used in the sun | Long-distance detection, Polarizing lens reflective type: 400cm | ||||
| General purpose photoelectric sensor suitable for logistics device | Suitable for EN product (with NPN and PNP) in the world | ||||
| Standard polarized lens reflective type | |||||
 |
|||||
| Product model | Feedback reflective type | ||||
| Model | NPN | NO | EN-33-D1S200NA | EN33-D1S300NA | EN33-D1S400NA |
| NC | EN-33-D1S200NB | EN33-D1S300NB | EN33-D1S400NB | ||
| PNP | NO | EN-33-D1S200PA | EN33-D1S300PA | EN33-D1S400PA | |
| NC | EN-33-D1S200PB | EN33-D1S300PB | EN33-D1S400PB | ||
| Power supply | 12-24VDC±10% fluctuation | ||||
| Consumption current | <30mA | <30mA | <30mA | ||
| Effective detection range | 200cm | 300cm | 400cm | ||
| Standard sensing object | Φ60mm (reflective) opaque object | ||||
| Light | Infrared LED 660nm 、 Infrared 880nm | ||||
| Response time | Move and reset less than 1ms | ||||
| Ambient illumination | Lamp： Less than 3000Lus； Sunlight：Less than 11000Lus |
||||
| Ambient temperature | -25°C ~ 55°C without icing and condensation | ||||
| Ambient humidity | 30-85%RH | ||||
| Insulated resistance | >20M | ||||
| Voltage resistance | AC 1000V 50/60Hz 1 minute | ||||
| Material | 外壳：增强ABS 镜片：聚碳 Housing: reiforced ABS, Lens: polycarbon | ||||
| Product standards | GB/T14048.10-2016 | ||||
| Protection level | IP64 (IEC) | ||||
| Circuit protection | Protection against error output, power supply reserve connection, pass/cut off (100ms) |
||||
 |
|||||
| EN33 through beam type | ||||
| Technical parameters | ||||
| A photoelectric sensor that can be used in the sun | Long-distance detection through beam type：1000cm | |||
| General purpose photoelectric sensor suitable for logistics device | Suitable for EN product (with NPN and PNP) in the world | |||
| Inter-installation without interference | ||||
 |
||||
| Product model | Opposite type (Through beam type) | |||
| Model | NPN | NO | EN33-D1E1000NA | EN33-D1E500NA |
| NC | EN33-D1E1000NB | EN33-D1E500NB | ||
| PNP | NO | EN33-D1E1000PA | EN33-D1E500PA | |
| NC | EN33-D1E1000PB | EN33-D1SE500PB | ||
| Power supply | 12-24VDC±10% fluctuation | |||
| Consumption current | <30mA | <30mA | ||
| Effective detection range | 1000cm | 500cm | ||
| Standard sensing object | Φ5mm opaque object | |||
| Light | Infrared LED 880nm | |||
| Response time | Move and reset less than 1ms | |||
| Ambient illumination | Lamp： Less than 3000Lus； Sunlight：Less than 11000Lus |
|||
| Ambient temperature | -25°C ~ 55°C without icing and condensation | |||
| Ambient humidity | 30-85%RH | |||
| Insulated resistance | >20M | |||
| Voltage resistance | AC 1000V 50/60Hz 1 minute | |||
| Material | Housing: reiforced ABS, Lens: polycarbon | |||
| Product standards | GB/T14048.10-2016 | |||
| Protection level | IP64 (IEC) | |||
| Circuit protection | Protection against error output, power supply reserve connection, pass/cut off (100ms) |
|||
 |
||||